Wireless 4WD Longboard Skateboard Drive Controller with Remote ESC Substitute -Electric four-wheel skateboard control system: - Using the sinusoidal wave scheme, the performance is stable than the ESC, and it is not easy to burn out. - Features: Low speed and high torque Two-way communication, you can check the power of the skateboard through the remote control Low voltage alarm function, undervoltage and power failure protection Operation: 1: Connect the main control to the power supply 2: The power is turned on, wait for two seconds, then press and hold the key for about 6 seconds. Wait until the switch indicator flashes. 3: Turn on the remote control switch and use a small screwdriver to press the button inside the small hole in the lower left corner of the remote control. 4: The remote control is turned off for two seconds and then turned on. Waiting for the remote control signal light and the switch signal light to flash at the same time indicates that the match is successful! Controller Voltage Change Description: 10s 36V: Disconnect Solder Joint 1, Disconnect Solder Joint 2 Note: Different voltages, different alarm voltages and protection voltages Carrying weight: 120KG Application areas: scooters, wheelbarrows, twisting cars, balancing cars Suitable for hub motor RC motor 5055 5065 6354 6364 6374 6384 The remote controller matches the main controller with a signal