Features:1. Made of high quality material, brand new and durable in use.2. Qualified butane gas should be used, poor quality gas may damage lighters or reduce its service life.3. Suitable for restaurant, household, picnic, hiking, camping and other outdoor activities.4. Designed with compact size and light weight for portability. Widely used to ignite stove, cigarette, candle, or used for outdoor camping, picnic, BBQ, etc.5. Ergonomic design for comfortable holding in the hand.Specification:Condition: 100% Brand NewItem Type: Gas LighterMaterial: MetalColor: Shown as PictureOverall Length: Approx. 11.7cm / 4.6inWidth: Approx. 4.2cm / 1.7inHeight: Approx. 2.8cm / 1.1inPackage List:1 * BBQ Lighter(Oil Not Included)1 * User ManualHow to operate correctly?1. Before inflating, use a small tool to hold the inflatable core, completely discharge the residual gas inside, and eliminate the pressure in the gas tank of the lighter.2. Press the outlet of the aerated gas cylinder vertically downwards, press each time for about 5 seconds, two or three times.3. Please wait for about 5 minutes after the inflation is completed. If there is still no fire after 5 minutes, please adjust the adjustment valve to a larger value. (note + - direction)Detailed inflation introduction instructions:Refueling method:1. When refilling, there must be no visible flame around, to ensure safety. Do not refill while smoking.2. Qualified butane gas should be used. Inferior gas may damage the lighter or reduce the service life.3. When the normal model is refilled, please headstand the lighter, align the gas outlet of the gas bottle and cover the air inlet of the lighter, and press it several times, each time for about 2 seconds; If the gas cannot be filled, it may be that extra air is left in the steam box. At this point, you can deflate, use a small screwdriver to align the air inlet and deflate 1-2 times, then perform the air filling operation.4. When refilling, first loosen the air inlet screw cover with a flat-blade screwdriver and other tools, then follow the above steps. After the filling is completed, the screw cap can be flattened, not too tight; otherwise, the cover will not be dense and the cover sound will not be crisp, and the gas will escape.5. When the gasoline engine is refueling, the head cover should be opened, the movement should be pulled out and reversed, and the outer sponge should be opened to add a proper amount of gasoline. After the gasoline penetrates into the inner layer of cotton, the outer sponge is covered and then inserted into the casing.6. After all kinds of lighters are refueled, wait at least 1 minute to adjust the temperature of the newly charged gas to room temperature, and then ignite after the residual gas attached to the lighter is completely evaporated. If the ignition operation is performed immediately at this time, the residual gas on the outside of the lighter may be burned, posing an unnecessary danger. After refilling the gas, if the flame height is too high or too low when used, it is a normal phenomenon, and the flame height can be moderately adjusted.Adjust the flame:1. When using, as the gas content of the product decreases and the ambient temperature changes, the flame height will change to a certain extent. This is a normal phenomenon, you can adjust the flame height moderately;2. When used, the normal flame height should be adjusted; the windproof and straight-cut lighters are 1.5-2.5 cm; the gasoline and open flame lighters are 2.5-4.0 cm;3. If you need to adjust the height of the flame, please use a flat-blade screwdriver to align the groove of the flame regulator; if the lighter itself has an adjustment ring, you can adjust it directly with your finger, and turn it clockwise in the direction of the (-) arrow. , adjustable low flame height; turn counterclockwise toward the (+) arrow to increase the flame height. Note: Rotate counterclockwise and cannot exceed half a turn on a normal flame height. Otherwise, it may damage the product;4. The gasoline lighter should control the flame height by adjusting the height of the ignition wick. If the flame height is too high, the wick can be cut with scissors. If the flame height is too low, the wick can be properly pulled out.Attention:1. Contains pressurized flammable gas, please keep away from children when using;2. Do not puncture or throw a lighter, do not throw it into the fire;3. Please use in a ventilated environment, pay attention to flammable materials;4, the direction of the fire is strictly prohibited towards the face, skin and clothing and other flammable substances, so as to avoid danger.5. When igniting, please look for the position of the fire exit, and press the ignition moderately. Different styles of lighters are ignited in different ways: divided into straight and side.6. When using, if there is any smog and other debris falling into the fire outlet, you should blow it in time to remove the sundries, otherwise it will cause bad fire