Vet Veterinary Animal Pregnancy Scanner with 5.7 Inch LCD Display Portable Digital Pregnancy Scanner for Sows AU Plug 100-240V Item Type: Veterinary Pregnancy Scanner Product Material: PVC Color: As Pictures Shown Weight: Approx. 4300g / 9.5lb Display: 5.7 Inch LCD Display Frequency: 50-60Hz Adapter Output: DC 12.8V 3.9A Host Size: Approx. 18x16.5x8.5cm / 7.1x6.5x3.3in Storage Box Size: Approx. 35.5x21x19cm / 14.0x8.3x7.5in Work Environment: Ambient Temperature: 10℃~40℃ Relative Humidity: 30%~75% (Non Condensing) Atmospheric Pressure: 700hPa~1060hPa Storage and Transportation: Ambient Temperature: -20℃~55℃ Relative Humidity: 30%~93% (Non Condensing) Atmospheric Pressure: 700hPa~1060hPa Measurement and Calculation Items: The Obstetric Tables of System Include: 1. Bovine, 2. Equine, 3. Sheep, 4. Canine, 5. Feline, 6. Goat, 7. llama, 8. Swine, for Doctors' Reference Power Supply Mode: AC and DC Power Supply, Equipped With A Large Capacity Lithium Battery, Which Can Work For More Than 200 Minutes Battery: Lithium Ion Battery, 2400mAh, Model CNLB 01(Shipped with Built in Battery) Page Setup: I. Chinese and English Settings 1. Press the frozen image, and press the up and down direction keys to move the cursor to the "Setting" position; 2. Press up and down direction keys to select the setting interface; 3. Press the Mode key to realize mutual conversion between Chinese and English. 4. Press Enter to exit the setting interface. II. Mode Selection In the real time state, press the Mode key repeatedly to realize the conversion of five modes: B, B/B, 4B, B/M, and M. Fault Symptoms Exclusion Method Power on, the power indicator does not light up, and the screen does not display 1. Check the power supply. 3. Check the power adapter. The display has characters, grayscale display and no supersound image The probe may not be connected properly. Shut down the machine and reconnect the probe. Intermittent stripe interference, snowflake interference or image far field interference appear on the display screen 1. Check the power supply of the product (whether the power supply is interfered by other equipment). 2. Check the environment. There are motors, supersound atomizers, cars, computers or other interference sources nearby (electromagnetic interference in the space around the instrument). 2. Adjust the brightness and contrast of the product. Operation panel failure The machine shall be restarted after shutdown. Probe NameFunctionSound HeadThe sound beam emitted by the transducer is scanned mechanically in a sector at a certain angleCableConnecting probe and probe plugProbe PlugConnect the probe with the supersound diagnosis systemFreeze SwitchPress the key to freeze/unfreeze the image Installing and removing the battery 1. Install the battery Put the battery into the battery compartment of the host, button the "upper cover of the battery compartment" into the corresponding position, press the arrow to turn the "push button of the battery compartment" in the opposite direction, and then lock the "upper cover of the battery compartment". 2. Remove the battery Press the "Battery compartment push button" in the direction of the arrow to remove the "Battery compartment upper cover" as shown in the figure, and take out the battery. Power on and off In the shutdown state, long press and hold the "Power" key, the machine will be turned on, and the power indicator will be on. When the machine is turned on, press and hold the "Power" key for a long time, the machine will shut down and the power indicator will go out. When shutting down, please note that the press time is slightly longer than the normal press time. Note: When the temperature is lower than 0 ℃, the probe may rotate abnormally after startup, and then enter into normal state; At lower temperatures, the recovery time will be slightly longer.