Small and beautiful structure - Small And Lightweight Body,Can Be Carried Around, Ready To Use,Compact Structure,Easy To Store,Does Not Take Up Too Much Space. High quality materials - Aluminum Alloy Turntable, durable, wear and corrosion resistant. Excellent work performance - 0~ 2000 Rev / Min: In The Case Of No Load 5V, It Will 2000 Rev / Min. Safe And Silent: High Quality And Safe, Smooth And No Noise.Stepless Speed Regulation: Manual Control Speed Regulation, One-Way Stepless Speed Regulation. Widely use - This Small Professional Ceramic Wheel Machine Is Specially Suitable for School Teaching And Pottery Diy Shop Or Home Use, To Satisfy Professionals And Pottery Enthusiasts. Sales service - Please feel free to contact us if you have any questions. We will give you a satisfactory solution. Rich accessories: 8 pottery auxiliary tools + 10 nylon brushes. Parameter requirement: product name:Upversion USB Pottery Mchine. No-load rotating speed: 0-2000 rpm. Voltage: DC 5-7 V. Turntable beating: 0.15mm. Sound decibel: 65dB. Turntable diameter: 45mm. Peripheral size: 16*11*9cm. Instructions: Please clean the machine in time after using the machine for the next time. When the machine switch is turned on, turn the speed control knob and slowly rotate from left to right. At this time, the aluminum alloy disc will rotate, and the speed will be the fastest when it is rotated to the rightmost side. The operator should adjust the reasonable speed based on the familiarity with the machine. When the machine appears to be unable to rotate, stopped in time. Whether you are a novice or a master, please do not copy the large style pottery method. The speed does not need to be too fast and the speed is slower. If the speed is too fast, the mud will be easy to get out of the machine. Add less water, if too much water is added, the mud will become soft and not easy to form. The blank can be thicker when first, and then slowly thinned when finishing. Mini drawing power is very small, if the force is too large, the turntable will easily be stopped. It is recommended to use ceramic tools for auxiliary molding, which is easier to use and operate. Precautions: Clean the machine with a sponge in time after use. The machine can't be overloaded, it can't be pressed hard, otherwise it will damage the motor. Charger needs to be self-provided, voltage range DC 5-7V current 1A.