Accurate measurement: The three-in-one soil tester can measure soil moisture from 1 to 10, read light intensity from 0 to 2000, and read pH value between 3.5 and 8. You can adjust the environment for plant growth over time. Easy to use: The soil tester does not need a battery. Insert the probe (at least 10 cm deep) into the measuring area for accurate data. Easy to carry and store, even when working in the field, it does not take up too much space in your backpack. No battery required: The 3-in-1 soil tester does not require a battery and can be placed directly in the soil. large digital dial, clear printing, more convenient reading. Set the temperature value, brightness and pH value by pressing the button. easy to use Application Test: BIFY soil moisture meter measures soil moisture and pH value. It is a great tool for managing gardens, flowers, plants, vegetables, shrubs, etc. Test Application: The soil moisture meter can be used in flower gardens, indoor plants, greenhouses, outdoor spaces, etc. It is a valuable aid for gardening by simply inserting the soil tester into the soil to test soil moisture, pH and soil illumination Product Description Color: Green 02. This moisture meter measures the moisture content of the soil and is the perfect tool for growing plants indoors and outdoors, for your garden and lawn.. Feature:. 1. With this measuring device, you get to know your soil better and can refer to specific measurement values when caring for your plants. 2. So you know when it is time to water. If the soil is dry and needs water, or if it is wet and can continue to dry for a day. You will never overwater or underwater your plants again.. Note: If the soil is very dry, the meter pointer will not deviate. This means you need to water the plants immediately.. Use the steps: 1. Insert the probe about 8-10 cm deep into the soil.. 2. Adjust the position of the probe until the scale pointer deviates slightly. 3. After 10 minutes, note the moisture / pH / light level on the dial.. 4. Remove the probe from the soil and wipe it clean after each use. Tips:. 1. Use fine sandpaper to gently sand the probe so tt it is clean and dry, and then use it.. 2. Avoid contact with stones or rd objects, otherwise the probe may be easily damaged. 3. Do not hold the probe in the soil for too long, otherwise it may be damaged. Do not use the probe to test soil or rd surfaces. 4. Never use it to test water. Features:. Moisture Range: 13 sec (DRY), 47 normal (NOR), 810 moist (WET).. Soil pH: 4.5 Strongly Acidic, 4.5-5.5 Strong Acidic, 5.5-6.5 Acidic, 6.5-7.5 Neutral, 7.5-8.5 Alkaline, 8.5-9.5 Strongly Alkaline, 9.5 Extremely Alkaline. Package Content:. 1 x Moisture Sensor.