Stepper Motor Forward And Reverse Module Digital Display SMC02 Drive Integrated Control Board Pulse/Speed Control Module Features: 1: Widely used 2: Stepper motor controller + driver integrated 3: TTL serial communication 4: Automatic/manual multiple modes 5: LCD display Parameters: Model: ZK-SMC02 stepping motor controller + driver Adapted motor: stepper motor Number of control axes: single axis Motor signal: common cathode Power supply range: DC 5-30V universal Drive capacity: 4A Instruction features: streamline and optimize multiple commonly used instructions Acceleration and deceleration control: Yes Input reverse connection protection: Yes Remote communication control: TTL serial port Main functions of the system: automatic, manual, setting, serial port control Speed range: 0.1~999 laps/minute Number of forward pulses: 1-9999 pulses Number of reverse pulses: 1-9999 pulses Cycle work times: 1-9999 times Forward delay time: 0.0-999.9 seconds Reversal delay time: 0.0-999.9 seconds Subdivision selection range: 1-128 subdivision Product use environment: -5℃-60℃ (non-condensing) Other Instructions: 1. As long as it is a 2-phase 4-wire 5-wire 6-wire 8-wire stepper motor, it can be controlled. 2. It can control drivers with similar interfaces. 3. The number of pulses for one revolution should be determined according to the subdivision of the driver and the step angle of the stepper motor Packing List: 1*controller _x000D_ _x000D_