Item Type: Spring Steel Plate Material: Steel Color: Golden Product Size: Approx. 310 x 310mm / 12.2 x 12.2in Applicable Model: For CR-10, for CR-10S Print Reference Temperature: MaterialHot BedNozzleDescription PLA50-60200-210Support Both Sides. ABS70-120240-250Powder side is recommended. After the temperature of the smooth surface exceeds 80, the surface is easy to foam PETG60-85230-245Support Both Sides Carbon Fiber50-60200-220Support Both Sides. Close to PLA, hardened steel nozzle is recommended TPU50-60200-220Support Both Sides Wood50-60200-220Support Both Sides. Close to PLA Package List 1 x Spring Steel Plate 1. The steel plate is elastic steel plate, and the printing plate needs to be flat when used, and the magnetic attraction is strong, which can firmly adsorb the plate on the plate.2. The first layer sprinklers should not scratch the platform, otherwise the sprinklers will scratch the platform and wear out the sprinklers.3. When printing the first layer, the nozzle should not be too far away from the platform, otherwise it will not stick to the printing platform, and the gaps between the nozzle and the steel plate should be about a piece of A4 paper.4. The model cooling fan cannot be turned on for the first layer printing, otherwise it will affect the adhesion of the first layer printing.5. Add a skirt when printing a model with a small contact surface. 1[DOUBLE SIDE COATING] The flexible steel plate has gold powder and smooth PEI double sided coating, meet more printing needs. 2[APPLICABLE MODEL] The size is 310x310mm, used for the same size building board, suitable for CR-10, for CR-10S models. 3[SIMPLE OPERATION] Just put the spring steel plate on the hot bed of the 3D printer to use, with convenient and safe operation. 4[SPRING STEEL] The flexible PEI sheet is made of excellent spring steel, which has good bending resistance and is not easy to kink or warp. 5[EASY REMOVING] The spring steel sheet can be easily removed by bending and ejecting, and it is easy to print and maintain.