1、This is an inductive proximity switch sensor with 5mm detection distance. 2、When the object approaches the sensing area of the switch, the switch can quickly emit electrical commands without contact or pressure required, accurately reflecting the position of the moving object. 3、The switch stays open, and closes when it detects object in detection distance. 4、Quick response, high reliability, strong anti-interference capability. 5、Widely used in automatic control system for detecting, positioning control, counting, automatic protection and more. Features: This is an inductive proximity switch sensor with 5mm detection distance. When the object approaches the sensing area of the switch, the switch can quickly emit electrical commands without contact or pressure required, accurately reflecting the position of the moving object. The switch stays open, and closes when it detects object in detection distance. Quick response, high reliability, strong anti-interference capability. Widely used in automatic control system for detecting, positioning control, counting, automatic protection and more. Specification: Model: SN04-N2 Detection Distance: 5mm ± 10% Detection Object: Iron/Magnetic Metal (Detection distance of non-magnetic metal will reduce) Response Frequency: DC: 0.5kHz, AC: 25Hz Power Supply Voltage: DC10-30V Output Mode: NPN 3-wire normally open (NPN NO) Output Current: 300mA Cable Length: 1.2 meters Temperature Range: -25~60°C Insulation Resistance: >50MΩ (DC500 megohmmeter) Shell Material: ABS Detection Surface Material: ABS Package List: 1 x Inductive Proximity Switch 1 Pack of Screws