Description: Sublimation Silicone Wraps: Our sublimation silicone flat-bottomed cups are specially made for 10/15/20/30-ounce mugs and tumblers, and will provide you with a good fit. They can be used to fix the cups and help the printer to print beautiful graphics, without shrink wrap and heat guns, make it quick and easy to install and remove. High-quality Silicone Material: The 3D mug press clamp is made of high-quality heat-resistant silicone material, and it with metal buckles, durable, reusable, high temperature resistant, not easy to break or deform, can be bent at will, easy to clean, and can be used for a long time. Eay to Use: Just put the silicone mug clamp on the cup, close the metal buckle at each end, and then squeeze it until the metal buckle is firmly clamped together. The installation is very simple, mug can be effectively fixed during printing, very convenient and fast to use. Perfect Size: There are 4 sizes of the red mug silicone heat press fixture, which is suitable for a 10/15/20/30 oz mug hot press. It can perfectly wrap and closely fit a tight-fitting straight or tapered flat-bottomed cup, which is very practical. Practical functions: Mug cup clamp is suitable for 3D sublimation transfer machines, which can help you fix the cup and the picture during the sublimation process, thereby preventing the misalignment of the pattern and causing the operation to fail, they can help you to save your time and improve efficiency, make your own unique cup. Specification: Application Type: Mug/Tumbler (Drinkware) Type: Silicone Wrap Sublimation Press Press Size: 11/15/20/30 oz Color: As shown Size Chart: 11OZ: 240x115mm/9.45x4.53inch 15OZ: 240x170mm/9.45x6.69inch 20OZ: 205x230mm/8.07x9.06inch 30OZ: 245x250mm/9.65x9.84inch Package Includes: 1*Sublimation Silicone Tumbler Wrap