English: Description: This professional digital satellite detector is far more accurate than any other meter in its class. The signal meter requires no recalibration or complicated programming. It allows you to setup or maximize your satellite signal reception on your satellite dish yourself without needing help from a friend or making multiple trips to your roof. Features: 1. Ease of Use. Handy tool for aligning any satellite dish in minutes. 2. Extremely sensitive meter indicates very small changes in signal strength. 3. Illuminated meter display for night time use. 4. High quality and long lasting performance. 5. Lightweight and pocket sized. Specification: Condition: 100% Brand New Frequency Range: 950-2150MHz Input Level: Max. -10dBm Input Level: Min. -40dBm Insertion Loss: 5.0dB Power Supply: 13-18V DC Size: Approx. French: 11 * 6 * 3.5 cm / 4.3 * 2.3 * 1.3 inches Weight: about 0.126 kg Material: ABS + mental Color: white on black Satellite finder application method: 1. Connect the LNB researcher to the receiver and antenna. 2. Adjust the knob on the front panel of the star finder so that the dial pointer points to the "5" position. 3. Adjust the antenna azimuth and elevation angle, when the star finder pointer reaches the maximum deviation angle, counterclockwise to adjust the knob on the front panel, to attenuate the received signal part, and adjust the antenna azimuth, elevation and polarization angle of the LNB until the star finder needle stops rising. 4. The satellite receiver is used to determine whether the signal is the required star signal. If so, remove the finder and reconnect the receiver to the LNB.