Auto detection of K-Line/CAN with option to bypass and force preferred communication protocol. Temporary immobilizer bypass function for bench flashing on ME7 systems. Boot mode support for ECUs with C167 and ST10 processors. EEprom read/write functions available for select ECUs. TPROT level checking for MEDC17 without opening the ECU. System requirements: Install on Windows 7. Proper driver installation is required before launching the software. Use only the driver provided on the included CD; do not use drivers from other MPPS versions. This module enables advanced functionality for a range of ECUs, including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delco, Trionic, and others. Supported models: - 6JF: Full Read/Write micro-type and EEprom via K-line - 8DF: Full Read/Write micro-type and EEprom via K-line - 8F2: Full Read/Write micro-type and EEprom via K-line and CAN - 8F3: Full Read/Write micro-type and EEprom via K-line and CAN - 8GM: Full Read/Write micro-type and EEprom via CAN - 8GS: Full Read/Write micro-type and EEprom via CAN - 5SF3: Full Read/Write Flash and EEprom via CAN - 5SF3: Full Read/Write EEprom via K-Line - 5SF8: Full Read/Write Flash and EEprom via K-line and CAN - 5SF9: Full Read/Write Flash and EEprom via CAN Material: ABS plastic Color: Black Package Contents: 1 x MPPS V18.12.3.8 1 x Breakout Tricore Cable 1 x Connection Cable 1 x CD Note: Light reflection and display differences may cause slight color variation between image and actual item. Measurement tolerance: ±1–3 cm.