NX3 3D Fixed-wing 3 Axis Gyroscope Flight Controller Autobalance Stabilizer For Fixed-wing Aircraft RC Airplane _x000D_ _x000D_ NX3 3D Fixed-wing 3 Axis Gyroscope Flight Controller Autobalance Stabilizer For Fixed-wing Aircraft RC Airplane _x000D_ _x000D_ Features: _x000D_ NX3 Flight controller, Micro design, small size, supports single aileron model, V-tail model, delta wing model and dual aileron _x000D_ (flaperons) aircraft - Can also be used for 2 - axis on jets using 2 servos for ailerons and a servo on the _x000D_ elevator or if the jet uses 2 servos only, one serving the left aileron and elevator, and the other _x000D_ servo serving the right aileron and elevator, it can be set to a delta wing. _x000D_ Humanized design, independent potentiometer adjust for different axis sensitivity _x000D_ _x000D_ Optional - Three-mode switched from controller _x000D_ 1, Normal stability mode _x000D_ 2, Gyro off mode _x000D_ 3, Calibration _x000D_ _x000D_ Specifications: _x000D_ Input voltage: DC5 - 6V, directly connected to the ESC's BEC power supply can be use. _x000D_ Operating Current: 18mA _x000D_ Working temperature: -20 Celsius to 85 Celsius _x000D_ Remote control compatibility: PPM, PCM, 2.4G _x000D_ Dimensions: 25 40mm _x000D_ Net Weight: 6.5g _x000D_ _x000D_ Package includes: _x000D_ 1 x NX3 Flight controller _x000D_ 5 x Cable _x000D_ 1 x Screwdriver _x000D_ 1 x Instruction manual _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_