MT6701 Magnetic Induction Angle Measurement Sensor Module, 14-Bit Magnetic Encoder, Replacement for AS5600, 1 Set

MT6701 is a magnetic angle encoder chip based on differential Hall sensing principle. The chip senses the magnetic field component perpendicular to the surface as radial magnets with poles on the chip surface rotate. MT6701 outputs angle signals ranging from 0 to 360°. In addition to providing ABZ/UVW incremental output and Analog/PWM absolute angle output, the chip provides 14 bit digital angle output through the I²C/SSI interface. In addition to measuring the rotation angle, the MT6701 provides a press output to enable single chip button functionality. Product Features: - Based on differential Hall technology, providing absolute angle measurement from 0° to 360° - Working voltage 3.3-5.0V, working temperature -40°C to 125°C - Linear deviation typical value less than ± 1°, within the full temperature range less than ± 1.5° - System delay as low as 5us, supports speeds up to 55000 rpm - I²C/SSI interface reads 14 bit angle data inside the chip - Incremental output ABZ supports any resolution from 1 to 1024 lines - Incremental output UVW supports any polarity from 1 to 16 - Provides 12 bit PWM output or analog output (12 bit DAC) - Dedicated press detection output (change in distance between induction magnet and chip), supporting single chip button application - Built-in EEPROM, greater than 1000 repetitions of programming Package Contents: - 1 x Magnetic Encoder Board - 1 x Magnet - 1 x Pin (Color may vary) Note: Light reflection and different displays may cause the color of the item in the picture to differ slightly from the actual item. Manual measurement allows an error of +/- 1-3cm. Only the items listed above are included.