Holybro Fettec Fc-g4 Kiss V2 Flight Controller Stacks Built-in Holybro Tekko32 4 In 1 50a /60a Esc For Fpv Racing Drone

$1,049.00
+ $16.49 Shipping

Holybro Fettec Fc-g4 Kiss V2 Flight Controller Stacks Built-in Holybro Tekko32 4 In 1 50a /60a Esc For Fpv Racing Drone

  • Brand: Unbranded
  • product image
  • product image
  • product image
  • product image
  • product image
Holybro Fettec Fc-g4 Kiss V2 Flight Controller Stacks Built-in Holybro Tekko32 4 In 1 50a /60a Esc For Fpv Racing Drone

Holybro Fettec Fc-g4 Kiss V2 Flight Controller Stacks Built-in Holybro Tekko32 4 In 1 50a /60a Esc For Fpv Racing Drone

  • Brand: Unbranded
Price: $1,049.00
Sold by:
$1,049.00
+ $16.49 Shipping

In stock

We accept the following payment methods

Description

    Description: The Holybro FETtec FC G4 features the latest STM32 G4 MCU with math accelerator for the ultimate in-flight performance, onboard OSD for KISS flight tuning, 2 dedicated BECs for 5V and 16V switchable power, DSHOT2400 outputs for support of up to 8 motors, and dual 20x20 and 30x30 mounting holes.      Note: Currently, the Holybro Fettec FC G4 does not support BLHeli_32 ESC Configuration via FC Passthrough and BLHeli_32 ESC telemetry/current reading. An Betaflight Flight Controller is needed to configure BLHeli32 ESC Setting.   Specification     Latest STM32G4 Processor     170Mhz + Math accelerator     MPU6000     Supply voltage 6-27V (2S-6S Lipo)     2x dedicated onboard BEC (max. 600mA each)     5V BEC for RX     5V/16V BEC for VTX (switchable and real Pit*)     2x 8 pin connector for solder free ESC connection     Connector 1: ESC signal 1-4, telemetry, VCC, GND     Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND     1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems     real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3     2x 6 pin connectors for serials     RX1, TX1, 3.3V, VCC, 5V, GND     RX3, VCS/TX3, RGB LED, VCC, 5V, GND     1x 4 pin connector for receiver     Signal, TLM, 5V, GND     5 UART serials     UART 1 free     UART 2 used for Receiver     UART 3 free     UART 4 used for onboard OSD, can be set free     UART 5 used for ESCs / TLM / Onewire     4 ESC solder pads (Signal/GND) in each corner     Buzzer pads     4 tiny RGB LEDs (selectable color)     Supported ESC protocols     PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire     FETtec KISS firmware     Onboard OSD     Graphic OSD (STM32)     Full KISS Tuning     Filter (PIDs, Rates, Settings)     LED control (RGB LED, Racewire)          VTX     Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)     KISS GPS support + live map     Custom graphic pilot logo     Stick overlay     Custom layout     can be deactivated for usage of digital systems     Connector type: JST-SH-1mm     PINMAP          Tekko32 F4 4in1 50A ESC     F4 MCU @150Mhz / PWM output up to 96K / 4~6S / BLHeli32 / 30x30 The all new Tekko32 is the first 4in1 ESC in market to adapt the fast F4 MCU 150Mhz, providing a smooth control operation and quick response.
  • Fruugo ID: 149831672-316390820
  • EAN: 897709193276

Product Safety Information

Please see the product safety information specific to this product outlined below

The following information is provided by the independent third-party retailer selling this product.

Product Safety Labels

CE Mark
Safety Warnings: Please note that the product is safe under normal use conditions. However, improper use may lead to hazards such as damage, injury or other safety risks. Please read and follow the instructions carefully.This product complies with EU safety standards. However, for your safety, if any abnormality (such as strange smell, overheating, loose parts, etc.) is found during use, please stop using it immediately.In accordance with the EU General Product Safety Regulation, we remind you that this product is only suitable for [specific applicable people / scenarios]. Use in non - specified people / scenarios may bring potential safety hazards.

Delivery & Returns

Dispatched within 3 days

  • STANDARD: $16.49 - Delivery between Wed 08 October 2025–Wed 15 October 2025

Shipping from China.

We do our best to ensure that the products that you order are delivered to you in full and according to your specifications. However, should you receive an incomplete order, or items different from the ones you ordered, or there is some other reason why you are not satisfied with the order, you may return the order, or any products included in the order, and receive a full refund for the items. View full return policy

Product Compliance Details

Please see the compliance information specific to this product outlined below.

The following information is provided by the independent third-party retailer selling this product.

Manufacturer
The following information outlines the contact details for the manufacturer of the relevant product sold on Fruugo.

  • Jinjiang Nikai Trading
  • Jinjiang Nikai Trading Co., Ltd.
  • quanzhoushi jin jiang shi chidian zhen bai jie jin jie 1#1211
  • Quanzhou
  • CN
  • 362200
  • mickcara@mickcara.com
  • 8613625959351

Responsible Person in the EU
The following information outlines the contact information for the responsible person in the EU. The responsible person is the designated economic operator based in the EU who is responsible for the compliance obligations relating to the relevant product sold into the European Union.

  • Y & H S.R.L.
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • IT
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149