Technical Indicators: Product name: LED wall light Weight of the product: 594 grams Construction material: aluminum alloy The effective input voltage range: 100-277V. output voltage: 12 V Color Temperature: 3000K brightness: 665 lumens Power of the bulb: 12 W. Sealing index: IP65 Lifetime: about 50,000 hours package: LED wall light 1 * 12W 1 * Set of installation accessories LED applique, Waterproof wall light, black 12W Indoor and Outdoor LED Applique in Modern Aluminum, Warm White Adjustable Angle Applique, Black Waterproof Wall. Minimalist design: This applique adopts an elegant and trendy design, which blends perfectly with the interior style. It's an excellent source of light for the living room or bedroom, but it also adds a touch of sophistication to your corridor. high quality LED cob lamps: our LED wall sconces adopt LED cob technology and have a lifetime of more than 10,000 hours. 2 built-in cob bulbs, high light efficiency, no flash, soft light 3000k, energy saving protection and short circuit protection respecting the environment. The angle of the beam is adjustable: warm white, soft and comfortable. With the built-in deflector to adjust the beam, you can easily adjust the light intensity, which is very suitable for the part you want to decorate. waterproof and safe: The interior of this 12W applique is made of imported aluminum and is not distorted. An excellent job can not only withstand water and energy from stainless steel, but also prevent the human body from scratching edges and angles. Warranty: This lamp is not only suitable for indoor use, but also for outdoor use, such as parks or gardens. LED applique, Waterproof light, black mark LLL Our wall sconces are visually elegant and modern. It uses the new LED Cob technology, has a very long life (more than 50,000 hours) and high quality. The hull is aluminum alloy, which can provide lightness and rust. installation steps: 1. Remove the outer unit from the main unit of the wall lamp; 2. Use a small Allen key to remove the lamp holder from the main unit; 3. Choose two holes on the wall and place 2 plastic screws in these two holes, then attach the lamp holder to the wall with the 2 screws provided in the accessory bag. 4. Pass the filament through the rubber buffer of the pellet of the lamp. Loosen the cable connector on the accessory bag with a small screwdriver, then connect it to the wall with the cable connector. Insert the wires and tighten the screws; 5. Install the lamp cover on the main body of the lamp. The wall lamp has been successfully installed. Please allow a slight deviation in the measurement data and make sure it does not bother you before ordering. High quality store for you!