Advantages: 1.Use digital port to directly read sensor data and return true angle information. It is not the other way to read chip voltage value to judge angle. 2. Setting the origin by users. It is no longer necessary to consider installation position first, just adjust the origin setting knob on the after installation to complete the origin setting. The origin can be memorized in the and will not be lost.3. Real 360-degree controllable range.Features: For controller, model airplane wireless remote control and analog voltage control. Alloy gear high-power motor with high torque output. Aluminum alloy gearbox body is ultra-lightweight. Easy to install and durableApplications: Heavy-duty motion control of arm joints and leg joints of large robots. Industrial automation production line manipulator control. Precise control of valve angle. Large camera gimbal remote control. Various occasions requiring large torque angle controlLimit Parameters: Limit voltage: 11V~30V/DC (MAX). Current limit: 5A0.2A (MAX). Working angle: 180 or 0~360 (MAX)Control ways: RC mode: 1ms pulse mode: 1ms~2ms (pulse width)/50Hz~333Hz (frequency); 2ms pulse mode: 0.5ms~2.5ms (pulse width)/50Hz~333Hz (frequency). Analog voltage mode: 0V-5V input voltage (0V corresponds to 0 and 5V corresponds to 360). Weight: 510~560G/1.1-1.2LBColor: silvermaterial: metalRated Parameters (Recommended Operating Conditions):Rated voltage: 12V~24V/DC (11V/MIN~30V/MAX, limit voltage)No-load current: Less than 500mA (current limit: 5A, it is recommended to use a switching power supply or battery greater than 5A)Limit angle: 180 or 0~360 (MAX), the steering gear has electronic limit adjustmentControl ways: RC mode: 1ms pulse mode: 1ms~2ms (pulse width)/50Hz (frequency). Suitable for wireless remote control. 2ms pulse mode:0.5ms~2.5ms (pulse width)/50Hz (frequency). Suitable for multiple-way steering gear controller control. Analog voltage mode: 0V-5V inputvoltage (0V corresponds to 0 and 5V corresponds to 360)Control resolution: 360 corresponds to 12Bit resolution (4096), 32-bit MCU for ARM, real digital port to read magnetic encoding dataMaterials: gear and shaft: alloy steel; gear box body: cast aluminumWeight: 550G/1.2LBDimensions: 95 x 60 x 110mm/3.7 x 2.4 x 4.3 inchMechanical life: Greater than 1,000,000 times/full load (conservative value)Package Contents:1 x steering gearNote:Battery is not included.Only the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.