Features: Single durometer blade with flat bottom. Made from a single piece of polyurethane material. Designed to balance resistance to various types of ink. Offers high resistance to abrasion. Equipped with a classic contoured wooden handle. Smooth hardwood finish. Length: 8 inches. Approximately 1.5 inches of polyurethane exposed from the wooden handle. Introduction: A squeegee, also known as a scraper, is a tool used to move ink across a screen to transfer it onto a substrate. Suitable for both graphic and textile applications, ideal for hand printing and many machine applications. Handles are made from kiln-dried, precision-cut lumber to prevent warping, providing a smooth, ergonomic shape for comfortable handling. Blades are molded under high heat and pressure, with a tensile strength exceeding 2,000 lbs, helping to prevent ink streaking and delivering a durable, consistent printing edge. Specification: Material: Rubber, Wood. Hardness: 70 Durometer. Length: 20 cm (7.9 inches). Width: 10 cm (3.9 inches). Thickness: 2.3 cm (0.9 inches). Color: As shown. Package Included: 1 x 70 Durometer 20 cm Screen Printing Squeegee Blade. Note: The hardness rating is an estimate based on material characteristics. Squeegee hardness typically ranges from 50 (softest) to 90 (hardest). This blade is considered medium-soft, with slight pliability and may show indentation when pressed. The actual product color may vary slightly due to lighting and display differences. Measurement tolerance: ±1–3 cm. Package includes only the items listed above.