Cloning chip types:2260(PT2260,SC2260,LX2260,HX2260); 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527( EV1527,HS1527,HX1527 ), FP527, CS5211, SMC918, SMC926, AX5026, AX5326-3, AX5326-4, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014,HT12D, HT46F49E, PIC16F629,PIC16F630 and so on.Different chip manufacturers have different prefixes chip model, as long as the digital portion of the chip can be the same model.Note: We usually do not recommend copying a rolling code chip, because there are many uncertainties when copying a rolling code chip. When copying a rolling code chip remote control, it is not possible to determine whether the your remote control chip is an encryption chip. Therefore, we do not recommend copying the rolling code remote control.Type: Remote ControlChannel: 4Frequency: 433MHzRated Voltage: 12VRated Current: 10mAUse steps:Clear code: two fingers at the same time hold the unlock key and lock key; the LED light flashes 3 times in about 2 seconds; let one of the fingers go (the other hand cannot let go), and then use the loose finger to quickly click three times on the loose button until the LED light flashes quickly; the two fingers can release; then press any one key of the remote control; when LED light goes off, it means clear code is successful(four keys all empty); if after you press any button of the remote control, the light is still on, it indicates that the original code has not been cleared successfully. You need to re-clear, and only successfully clearing the code can cloning be successful. You can repeatedly clear and clone the code.Colour:BlackMaterial:plasticPackage Contents:50 x Garage Door Remote ControlOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.