Item Type:3D Printer NozzlesMaterial: BrassInput Diameter: Approx.1.75mm/0.07inOutput Diameter: Approx. 0.2mm/0.008in, Approx. 0.3mm/0.012in, Approx. 0.4mm/0.016in, Approx. 0.5mm/0.020in, Approx. 0.6mm/0.024in, Approx. 0.8mm/0.031in, Approx. 1.0mm/0.040inThread: M6Hex Diameter: Approx. 6mm/0.2in .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; } 1BRASS MATERIAL: MK8 nozzle is made of brass material. With glossy appearance and long service life 2EASY to INSTALL: The extrusion hole is centered and concentric, the hole diameter is glossy, the thread is clean, and is connected with M6, which is easy to install 3ACCURATE DESIGN: The 3D printer nozzle with recognizable size, which can effectively prevent the print head from leaking, with consistent printing and glossy polishing. The corner resistance is small to avoid the use of rounded corners to block the filaments 4APPLICABILITY and COMPATIBILITY: MK8 extruder nozzle is compatible with all 1.75mm/0.07in PLA ABS 3D printers, you can use the printer nozzles with confidence 5BASIC PARAMETERS: Input diameter is 1.75mm/0.07in, output diameter is 0.2mm/0.008in, 0.3mm/0.012in, 0.4mm/0.016in, 0.5mm/0.020in, 0.6mm/0.024in, 0.8mm/0.031in, 1.0mm/0.040in, thread is M6, the hex diameter is 6mm/0.2in