360HT Ultrasonic Cleaning Machine Mechanical Timing Heating Cleaner 6.5L 0~20minUS Plug 100~120V Item Type:Ultrasonic Cleaner Model: 360HT Type: Mechanical Timing Heating Inner Tank Capacity: 6.5L Inner Groove Size: 300 x 155 x 150mm / 11.81 x 6.1 x 5.91in Ultrasonic Frequency: 40KHz Ultrasonic Power: 180W Heating Power:300W Number of Vibration Heads: 3 Working Time Range: 1-20Min Temperature Range:0~80℃ Liner Material: SUS304 Stainless Steel Shell Material: Stainless Steel Basket: Equipped Sound Reduction Cover: Equipped Function:Glasses, rings, coins, jewelry, industrial parts, hardware tools, watches, dentures, surgical instruments, PCB boards. Instruction: 1. After unpacking, shake the machine slightly and listen to the sound in the chassis to confirm whether the parts are loose. 2. Place the machine in a ventilated and dry place to ensure that the machine is in a horizontal position; 3. Add an appropriate amount of cleaning solution (2/3 groove depth <L<3/4 groove depth) as required for cleaning; 5, adjust the ultrasonic working time: After the power is turned on, the right digital screen displays after turning on the power, turn the right timer knob clockwise to reach the desired cleaning time on the 0 to 20 minute time dial. The indicator light is on and a "ZIZI" sound is emitted, indicating that the ultrasonic is running. 6. Adjust the working temperature (select heating if necessary; mechanical type without heating): Rotate the left temperature controller clockwise to the desired temperature (20℃ or more). The heating indicator lights up and the heating part starts to work. 7. Shut down after completing work: After the cleaning work is completed, if it is not necessary to operate, the heating part should be turned off immediately, and the power supply should be disconnected. After the cleaning liquid is cooled to normal temperature, the cleaning liquid is drained, and the inner tank and outer casing are wiped clean. The used machine should be placed dry. Ventilation to avoid moisture in the control circuit. Q: What is an ultrasonic cleaner? A: Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signal in the fluid. Microscopic bubbles are formed, and then implode violently causing the cavitation which create an intense scrubbing action on the surface of the item being cleaned. Bubbles are small Through to penetrate microscopic crevices, cleaning them thoroughly and consistently. Q: Which products can I clean this model? A: Many products can be cleaned. Common such as glasses, necklaces, earrings, bracelets, electronics, watches, dentures, printer ink heads, razor heads, nibs, coins, badges, pacifiers, etc. Q: Which builders can be properly added for better cleaning and cleaning during the cleaning process? A: You can add cleaning liquid or detergent, such as: detergent, soapy water, disinfectant, etc., but do not add acidic or alkaline solution to the machine to prevent ABS corrosion damage.