360° PIR Ceiling Motion Sensor Light Switch, Adjustable Delay, Day/Night, 6m Range

Ceiling PIR Motion Sensor for Automatic Lighting Control Overview This compact ceiling infrared motion detector turns lights on when it senses human movement and switches them off after a selectable delay. It uses passive infrared detection of body heat and motion to automate lighting, reduce wasted electricity, and provide hands convenience in bathrooms, toilets, closets, hallways, and other indoor spaces. Key benefits Hands lighting: Automatically turns lights on when someone enters the detection area and off after a set delay, eliminating forgotten lights. Energy saving: Compatible with 110 to 240V AC lighting loads up to 800W to help reduce unnecessary energy use. Flexible operation: Choose nightonly or dayandnight operation and adjust sensitivity to reduce false triggers. Easy to install: Small sensor box and a detachable sensor head allow routing the sensor wire through tight openings for recessed ceiling installation. Main features 360degree detection for ceiling installation and 100degree horizontal detection for wall mounting. Detection range up to 6 m. Time delay options: 5 seconds, 30 seconds, 3 minutes, 5 minutes, 8 minutes, or Off. Daylight control: Operate in nightonly mode or both day and night via DIP switch. Sensitivity control: DIP switch selects low sensitivity (less prone to false triggers) or sensitivity (more responsive). Compact sensor box size 5.6 cm x 3.4 cm x 2.4 cm. The sensor head wire is detachable from the box to fit through installation holes. Rated load 800 W. Power supply 110 to 240 V AC, 50/60 Hz. IP rating IP20. Operating temperature range 10 to +40 C. Installation notes DIP switch 1: ON = sensor active only in low light (night only). OFF = sensor active in both day and night. DIP switch 2: ON = low sensitivity. OFF = sensitivity; sensitivity may respond to wind or nonhuman movement. The detachable sensor head and compact control box simplify wiring and mounting in ceilings or recessed fittings. Typical applications Bathroom or toilet: Ensure lights activate when someone enters and turn off automatically after use. Closet or storage room: Provide automatic lighting for short visits without a wall switch. Hallway or stairwell: Maintain safe, hands illumination while preventing lights from being left on. Package contents PIR sensor detector Technical specifications Detection angle: ceiling installation 360degree, horizontal installation 100degree Detection range: 6 m Time settings: 5 sec, 30 sec, 3 min, 5 min, 8 min, Off Power source: 110 to 240 V AC Max frequency: 50/60 Hz Rated load: 800 W Sensor box dimensions: 5.6 cm x 3.4 cm x 2.4 cm IP rating: IP20 Operating temperature: 10 to +40 C This sensor is suitable for indoor lighting automation where reliable motion detection and adjustable operating modes are required.