Item Type: Draw Wire Encoder Range: Approx. 10 - 1200mm or 0.39 - 47.24in Voltage: DC8-24V Output: Push pull output Cable Length: Approx. 1.5meter or 4.9ft Main Body Outer Diameter: Approx. 38mm or 1.5in Outgoing Mode: Side outgoing mode Central Shaft Diameter: Approx. 6mm or 0.24in Operating Temperature: -25-and85 Voltage: DC5-24V Package List 1 x Draw Wire Encoder 1. During installation, the cable should be vertical to the encoder, and the cable should not rub against the outlet.2. Do not loosen the cable connector after it is pulled out otherwise, the sensor may be damaged. Do not exceed the total length of the wire when pulling. 1TECHNICAL PARAMETERS: Encoder has 0.25 percent FS linearity, range 101200mm, voltage DC824V 2OPERATION MODE: Encoder adopts efficient linear displacement measuring device, push pull output, side out line 3APPLICABLE SCENARIO: Applicable to cylinder, testing machine and other industries, air pipe production equipment, printing equipment, automatic welding machine, automatic encoder, ink jet machine, robot and so on 4STABLE PERFORMANCE: Encoders are suitable for all kinds of environments. They are widely concerned for their small size, excellent performance under bad conditions, accurate, flexible and simple installation 5WIDE APPLICATION: Encoder is widely used in water conservancy, steel industry, has a large choice space Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-YJL official store