Starts from 1W - Ideal for LEDs. (not suitable for speed change). On/off PIR switch, adjustable twilight switching threshold, switching time: 10 seconds. - 7 min. Detection angle: 160 - Maximum range: 9 m - Built-in dimensions: 49 x 49 x 30 mm - IP20 protection - Only suitable for indoors and outdoors. Decorative panel 80 x 80 mm - Installation height: 100-180 cm - 230 V ~ / 50 Hz - Standby consumption: 0.1 W - Operating consumption: 0.45 W Power: 1 to 500 W for ohmic loads such as incandescent bulbs, 1 to 200 W for inductive loads such as LED lamps or fluorescent tubes. Product details: this comfortable motion detector directly replaces an on/off switch (not suitable for gearshift). Starts from 1 W - also ideal for LEDs. PIR on-off switch, adjustable twilight switching threshold, switching time: 10 seconds. - 7 min detection angle at 160 - Max. 9 m - Built-in dimensions (WxHxD): 49 x 49 x 30 mm - Suitable for flush-mounted boxes with 60 mm diameter and 68 mm diameter - Decorative panel 80 x 80 mm - Installation height: 100-180 cm - Power range: 1-500 W for resistive loads such as incandescent bulbs - 1-200 W for inductive loads such as LED lamps or fluorescent tubes 230 V ~ / 50 Hz - Standby consumption: 0.1 W , in operation: 0.45 W IP20, only for indoors.